7495 HD Electric Rope Shovel
Overview
Mining
Specifications
| Dipper Payload | 90 t |
| Dipper Capacity | 27.5-60.4 m3 (36-79 yd3) |
| Note | Dependent on application and material density. |
| Dipper Payload | 82 t |
| Dipper Capacity | 27.5-60.4 m3 (36-79 yd3) |
| Note | Dependent on application and material density. |
Specifications
| Dipper Payload | 90 t |
| Dipper Capacity | 27.5-60.4 m3 (36-79 yd3) |
| Note | Dependent on application and material density. |
| Working Weight - With Dipper and Standard Links | 2856700 lb |
| Ballast - Furnished By Customer | 574000 lb |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. |
| Note (2) | All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. |
| Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. |
| Ground Bearing Pressure - Total Effective Bearing Area (1) | 343 ft² |
| Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads | 34.75 ft |
| Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard | 58 psi |
| Ground Bearing Pressure - Total Effective Bearing Area (2) | 442 ft² |
| Hoist | A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
| Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard | 32.75 ft |
| Swing | Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
| Ground Bearing Pressure - 274.3 cm (108 in) Treads | 46 psi |
| Upper Works Overall Width - Including Standard Walkways | 44.25 ft |
| Planetary Propel | Dual-motor independent drive. |
| Radius of Level Floor | 52.49 ft |
| Dumping Height - With Clearance to Open Dipper Door | 30.84 ft |
| Cutting Height - Maximum | 48.75 ft |
| Revolving Frame Tail Swing Radius | 30.51 ft |
| Cutting Radius - Maximum | 74.75 ft |
| Note (1) | Optimal working ranges based on loading a Cat® 793F truck. |
| Note (2) | *All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. |
| Type | Automatic, single-line system for open gear lubricant and grease. |
| Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
| Power Requirements - 60 Hz | 7,200V |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V, 11,000V |
| Power Requirements - Peak power | 4466 HP |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V |
| Power Requirements - Average Power Demand | 832-1165 kW (1,116-1,562 hp) |
| Drive | IGBT Acutrol drive system. |
| Note | Other voltage options available to suit customer requirements. |
| Rope Data - Boom Suspension - Diameter | 3.25 in |
| Rope Data - Dipper Trip - Diameter | 0.625 in |
| Rope Data - Hoist - No. | 2 |
| Rope Data - Note | High impact ropes available as an option. |
| Rope Data - Crowd - Diameter | 2.5 in |
| Rope Data - Retract - Diameter | 2.5 in |
| Rope Data - Crowd - No. | 1 |
| Rope Data - Hoist - Diameter | 2.75 in |
| Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
| Rope Data - Boom Suspension - No. | 4 |
| Rope Data - Retract - No. | 1 |
| Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
| Rope Data - Dipper Trip - No. | 1 |
| Components (2) | External fastfill from lower level. |
| Dipper Payload | 82 t |
| Dipper Capacity | 27.5-60.4 m3 (36-79 yd3) |
| Note | Dependent on application and material density. |
| Working Weight - With Dipper and Standard Links | 1295777 kg |
| Ballast - Furnished By Customer | 260362 kg |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. |
| Note (2) | All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. |
| Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. |
| Ground Bearing Pressure - Total Effective Bearing Area (1) | 32 m² |
| Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads | 10.6 m |
| Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard | 400 kPa |
| Ground Bearing Pressure - Total Effective Bearing Area (2) | 41 m² |
| Hoist | A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. |
| Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard | 10 m |
| Swing | Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. |
| Ground Bearing Pressure - 274.3 cm (108 in) Treads | 316 kPa |
| Upper Works Overall Width - Including Standard Walkways | 13.5 m |
| Planetary Propel | Dual-motor independent drive. |
| Radius of Level Floor | 16 m |
| Dumping Height - With Clearance to Open Dipper Door | 9.4 m |
| Cutting Height - Maximum | 14.9 m |
| Revolving Frame Tail Swing Radius | 9.3 m |
| Cutting Radius - Maximum | 22.8 m |
| Note (1) | Optimal working ranges based on loading a Cat® 793F truck. |
| Note (2) | *All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads. |
| Type | Automatic, single-line system for open gear lubricant and grease. |
| Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
| Power Requirements - 60 Hz | 7,200V |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V, 11,000V |
| Power Requirements - Peak power | 3330 kW |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V |
| Power Requirements - Average Power Demand | 832-1165 kW (1,116-1,562 hp) |
| Drive | IGBT Acutrol drive system. |
| Note | Other voltage options available to suit customer requirements. |
| Rope Data - Boom Suspension - Diameter | 83 mm |
| Rope Data - Dipper Trip - Diameter | 16 mm |
| Rope Data - Hoist - No. | 2 |
| Rope Data - Note | High impact ropes available as an option. |
| Rope Data - Crowd - Diameter | 64 mm |
| Rope Data - Retract - Diameter | 64 mm |
| Rope Data - Crowd - No. | 1 |
| Rope Data - Hoist - Diameter | 70 mm |
| Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
| Rope Data - Boom Suspension - No. | 4 |
| Rope Data - Retract - No. | 1 |
| Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
| Rope Data - Dipper Trip - No. | 1 |
| Components (2) | External fastfill from lower level. |
Related Products
Title
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it
| 100 | 200 | # | # |
|---|---|---|---|
| 1 | # | 1 | # |